Side Stand Foot Enlarger

No
They are finished but I can't post them until Tuesday :thumby:
 
I have 3 of these left
There will most likely not be any more
so PM me if you would like one :thumby:
 
Have a bump for a premium product.


C'mon lads, this is the best side stand puck you can get for the GS
 
To stop it corroding from trapped road salt, smear the stand foot with copper grease before fitting the puck.
 
2 Left :thumb2


If anybody in the Worcester area has a 1200LC i could borrow the side stand off for a couple of weeks
for exchange for a free one i could look into making some for the LC :thumby:
 
Garry, you probably need to update the first post, the pictures aren't showing .... not for me anyway!
 
Garry H said:
2 Left :thumb2


If anybody in the Worcester area has a 1200LC i could borrow the side stand off for a couple of weeks
for exchange for a free one i could look into making some for the LC :thumby:
Click to expand...

The plastic puck gets chewed by tarmac (obviously). How about adding a 3mm aluminium plate to the underside with countersunk screws that go right through and dome nuts on top. Just an idea but I think it would work nicely.
 
To be honest I did 30k on my 1200 and the plastic part was still almost unworn
I have a mate who has done over 50k still fine
So unless you are in the habit of dragging the side stand along the floor all the time it won't be a issue
The plastic art is not machined out of crap It's durable
Unfortunately I can't edit the first post
That's why I added some more pics not long ago
 
I have seen many (and used a few) side stand enlargers.
This is the best I have come across thus far.

IMHO

Sent from a U11
 
Garry H said:
To be honest I did 30k on my 1200 and the plastic part was still almost unworn
I have a mate who has done over 50k still fine
So unless you are in the habit of dragging the side stand along the floor all the time it won't be a issue
The plastic art is not machined out of crap It's durable
Unfortunately I can't edit the first post
That's why I added some more pics not long ago
Click to expand...

No complaints from me it's great.

Maybe my stand has a funny angle but its rubbed up the bottom edge after only a couple of week's use. Of course, it's not going the wear out, I'm just surprised to see the edge looking frayed. I always thought my bike leaned a lot on the side stand right from when I took it on.
 
I still have one left and the original master one so that's 2 ;)
There won't be any more so PM me if you would like one of these :thumb
 
That’s a shame it’s well made and easy to fit. Certainly a lot better than the (tbh pointless) cameltoe stand enlarger plates.
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

Zoton
1250 GSA low suspension specific question - Side stand
Replies
11
Views
426
Santa-2512
Santa-2512
tornadof3
Is by-passing the side stand switch an MOT failure?
Replies
12
Views
834
DrFarkoff
DrFarkoff
Looking for exhaust box bolts (the flush head ones that mount through the side/centre stand)
Replies
1
Views
126
Steptoe
Steptoe
nicholsonj2252
First Guzzi
Replies
14
Views
637
DrFarkoff
DrFarkoff
DJ123
LoneRider Side Stand Foot Extension / Review
Replies
0
Views
428
DJ123
DJ123


Back
Top Bottom