640 adv,time for some tlc

That's good to know as I have a few 650 mastercyls.
Strangely on the funduro 650 the front brake feels really wooden with the standard setup.

I forget how they felt as standard but just remembered the one I used was a new spare when I had the Rallye bike so it's possibly not the same, it'll have to be trial and error although I think some just stick with the original.
 
Fooking hell,the motor spins up like my old 525 now:eek:
Has the same "bark" as well:cool:
Looking forward to getting forks back in now.
Hopefully the bike will perform as well as I thought it should,when I decided to buy it
I genuinely was a bit disappointed ,and was thinking about selling it:eek:
Will update when it's all back together and I've spun it up on the dyno :clap
 
Go for it :D

You know the standard rubber boot doesn't fit and the 625 boot is very tight (for length), I ended up making mine using both by cutting them with a big overlap and gluing them together :)

I recon I must have the correct carb,it went straight on.
Intake boot although a bit tight on the carb inlet,is the perfect length,happy days
 
Got my forks back today,so managed to get a quick run up the road with the flat slide fitted.
Whilst not perfect,as I havnt messed with it yet,
1st impressions are that the bike should have been built with this carb,,
If you Snap the throttle open in 1st ,it will flip ,end of:green gri
Dump the clutch in 2nd it will come up:clap
That's more like it.:cool:
Now where did I put that smaller front sprocket:augie
 
Sounds like you are out of your depth, i'll drop by to show you, "power is nothing without control":aidan
 
Considering selling this bike if anyone is in the market,
It’s done @ 2.5 to 3k miles on my trip to Spain last year and a few days out green laneing since the build,
Looking for £3.5

PM sent.....
 
I had to read all 11 pages to get to the 'selling it' bit. Bugger. Wish I had the space.
 
Just to say,I’m not selling cos I don’t like it or anything like that,:rob
This years trips are all two up touring so the 1100 will be used:thumb
I have a hankering for one of these :clap
So I’m building one for myself:D
 

Attachments

  • 18BA6297-6ECE-4250-BAD2-54B24D1750C4.jpeg
    18BA6297-6ECE-4250-BAD2-54B24D1750C4.jpeg
    162 KB · Views: 262


Back
Top Bottom