Autocom SPA

MaRRe

Registered user
Joined
Feb 1, 2017
Messages
5
Reaction score
0
Location
Belgrade
Hi guys,

couple days ago i received my Autocom SPA. But i forgot to buy 2 way radio cable (autocom part 2356).

Since all the SPA cables are little bit expensive i decided to build my own cables.

Can anyone take a picture of their 2 way radio cable in the Autocom it self?

I have the diagram on the grey DIN connector but i dont where each goes on the printed board it self?







Thanks :)
 
Buy a cable, trust me, which one do you want the battery pack to board or battery pack to grey din plug how you going to fit your PTT? Mains or grey 5 pin din?
 
I am planing to build my own cable from the board to the Baofeng 2 way radio. With PTT in between.

Currently i have a picture of GREY 5pin diagram.



I will cut out the 9v+ pin because i dont want to kill my Baofeng or Autocom.

All i need now is to match the pins from the GREY din connect to the connector on the board it self.
 
At the end i made my own cable and it works great with my Baofeng.

At the end i saved my self around 90 pounds. Or in euros around 105.
 


Back
Top Bottom