Shoei GT Air Scala Rider Q1 install

Victor c

Registered user
Joined
Jun 29, 2013
Messages
1,043
Reaction score
63
Location
North Wales
Hello all

Has anyone got any handy tips on fitting a Scala Rider Q series headset into a Shoei GT Air?
Hopefully new helmet should arrive tomorrow :)

Mark
 
I have a GT air and a Packtalk and it fits very easily with plenty of room for the speakers, on the packtalk you have to be careful not to catch the aerial when operating the sun shield.
 
Cheers chaps

I had it fitted to my Shark Vision R, but the speakers never really sat right.
 
Fitted

Fitted spot on.
A bit of trial and error with the side mount and went for the clamp on in the end. However fitting sequence was a little different to how I have approached it in the past.
Removed all linings and fitted speakers and mic first, with strips of gaffa tape securing the excess cabling.
Routed the mic and speaker cables to the left hand side.
Refitted all padding with the exception of left cheek pad.
Cut small gaps in left cheek pad side plastic iro where the cables would line up with side mount and connected mic to side mount.
Refitted left cheek pad.
Fitted clamp on side mount and and connected speaker cables.

Job done!
 


Back
Top Bottom