Trouser fastening clip replacement

Rugged Path

The Honourable.
UKGSer Subscriber
Joined
Jul 23, 2004
Messages
2,169
Reaction score
56
Location
Wybunbury, Cheshire East, England, EU
Is it possible to get a new replacement clip on these Beemer pants?
A swelling of the stomach had 'I assume' broke off the tab on the left side.
HOGroast
Nantwich, Cheshire
 

Attachments

  • PhotoChooser-00868aff-a559-4250-b579-20cb18981624.jpg
    PhotoChooser-00868aff-a559-4250-b579-20cb18981624.jpg
    235.7 KB · Views: 252
I've just replaced that exact fastener on a pair of 3 Phase trousers. I bought this set of fasteners and the tool initially, as I robbed a replacement 'hook' from a pair of old HG trousers I've got - http://www.ebay.co.uk/itm/PRESS-STUD-REPLACE-REPAIR-KIT-MEND-IXS-BMW-RUKKA-HEIN-GERICKE-Steel-button-face/122693774738?ssPageName=STRK%3AMEBIDX%3AIT&var=423104577769&_trksid=p2057872.m2749.l2649 I drilled out the old rivet, then used the tool to rivet the hook to the 3 Phase waistband. You can just as easily use a Phillips screwdriver instead of the punch.

I then found this kit, which has a complete set of hooks, bars and rivets, ready for the next breakage! - https://www.amazon.co.uk/gp/product/B01N8Z5JWL/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 I think Prym also do the same kit complete with the punch tool.

Pete
 
A great find Pete and just ordered a set. I know that the original trousers came with a spare 12yrs ago but, it is now lost in my boxes and bags of accumulated junk one collects over the years.
I did look on eBay but, was not putting the correct wording to bring this set up.
Thanks again.


Sent from Steve's fancy iPad using Tapatalk
 
BMW Dealers have a stock of spare fasteners for clothing and will usually give you them for free
 


Back
Top Bottom