Can anyone explain to me how the fasteners that hold the GS headlight enclosure thing function? Mine is missing one of the long M4 screws and captive nuts, imaginatively replaced with a tie wrap around the speedo area - the other three screws seem to be captive in some way. Is there some rubber sleeve in the holes in the back half that the screws go through, as the one hole without a screw in just seems to be around 8mm straight through. The cross heads of the 3 remaining screws are worn to buggery and I'd like to replace them, but I can't get them out using reasonable force.
It's tempting to spring for a Siebenrock replacement at £120 or so, bit I'd like to keep it original if possible, just fix a PO's bodgery.
I've had a look at the fiches, but can't really make out what's going on. I must be thick...
Ta, Jon
It's tempting to spring for a Siebenrock replacement at £120 or so, bit I'd like to keep it original if possible, just fix a PO's bodgery.
I've had a look at the fiches, but can't really make out what's going on. I must be thick...
Ta, Jon