I need to renew my rear brake disc, anyone know what the thickness of a new one is ... and what the minimum wear thickness is?
New rear brake disc needed ...
- Thread starter Bobbin-Man
- Start date
IIRC 5mm new and 4.5mm service limit.
I used Wemoto for disc and pads when I did mine.
I used Wemoto for disc and pads when I did mine.
- Joined
- Sep 27, 2002
- Messages
- 308
- Reaction score
- 0
Thanks 
I may as well be the one to mention it as someone will need to eventually 
It is advantageous to heat the retaining bolts up to release the loctite
type stuff holding the bolts and, ensure the tool you use is a very good fit into the bolt head as it is quite easy to
strip it.
Another bit of good advice is to obtain new bolts before you do the job.
All this is from experience
It is advantageous to heat the retaining bolts up to release the loctite
type stuff holding the bolts and, ensure the tool you use is a very good fit into the bolt head as it is quite easy to
strip it.
Another bit of good advice is to obtain new bolts before you do the job.
All this is from experience
Bendy toy
Registered user
Torx bits often seem to fit until you try the next size up.
Discs/pads/bolts all ordered
Similar threads
