Having a clearout of airhead parts

mikeyboy · Jan 30, 2018

Im going to have a clearout ,over the next week or so,
all parts will be going on eBay,but Ill post a list on here first.
Open to offers,certainly not looking to retire off the proceeds

1988 r80rt mono,forks,yokes ,cast wheels front and rear,tyres good,swing arm and bevel.nice cond.
2x spoked twin disc front wheels,@78 vintage
Rubber genuine ht leads ,pair,new ,never used,
Brand new headlamp glass /7
Front snowflake wheel.twin disc
R65 forks 78 with yokes chrome poor on one of the legs
78 ate calipers r65
Chrome pannier racks,believed to be g/s
Ate calipers.
R60/7 mainstand
R60/7rear mudguard
R60/7 rear lamp
R60/7 clockset showing 95k cable driven tachometer
Various footrests brake pedals etc,no GS ones
Pair 38 header pipes /7 type
Pair keihin stainless silencers of /7 may well fit others
2x short wheel base swingarm / driveshaft
2x pairs of koni dialarides,will need servicing poss damper rods.
Drop me a pm if any of this is of interest or call me
Mike 07786340692
I also have a rear spoked twinshock rear wheel,
hub is excellent,currently fitted with a 15 rim for sidecar use.
I only want the hub!!!!!!!!
Seems a shame to dismantle it as I feel sure it cost a fortune to build.
I will sell it ,but would prefer to swap for either just another good hub or a standard wheel with a cash adjustment depending on condition

DrFarkoff · Jan 30, 2018

mikeyboy said:
Open to offers

Come on Mikey You know the rules

"needs a Price!"

Stick a guide price up and haggle a bit in PMs

mikeyboy · Jan 30, 2018

DrFarkoff said:
Come on Mikey You know the rules

Stick a guide price up and haggle a bit in PMs

Aww come on price this lot :blast

mikeyboy · Jan 30, 2018

Ht leads £20
Headlamp glass £20
Rt front end £100
Rt wheels£125 pair
Spoke front wheels £125 each
Discs £50 pair
R65front end £50
R65snowflake wheel with discs £50
78 65 ate calipers £40 pair
Earlier type ate calipers £50 pair
Happy to service calipers prior to sale poa
Or for that matter anything for sale,including aquablasting and rebuilding spoke wheels etc etc

mikeyboy · Jan 30, 2018

R60 mainstand£10
Koni shocks £30&£50 pair respectively
Need to take a better look at the rest of the bits,
Happy to post photos as required

boatman · Jan 30, 2018

We need special rules for Mikeyboy :thumb2

mikeyboy · Jan 30, 2018

boatman said:
We need special rules for Mikeyboy

Not after any dispensations :augie

But I have to buy job lots of stuff to get the few bits I want or need.
I realise some of it may well end up in the bin but let’s say someone wants a fork slider because of a damaged thread,I’d rather take a cheeky offer for the front end than be lumbered with 1/2 a set of forks

Today’s trip to wales :clap

R100rs motor,
2 gearboxes
2sets 40 mm bings
Spoke wheels
2x airboxes etc etc

lewisjohn · Jan 30, 2018

mikeyboy said:
Not after any dispensations
But I have to buy job lots of stuff to get the few bits I want or need.
I realise some of it may well end up in the bin but let’s say someone wants a fork slider because of a damaged thread,I’d rather take a cheeky offer for the front end than be lumbered with 1/2 a set of forks
Today’s trip to wales
R100rs motor,
2 gearboxes
2sets 40 mm bings
Spoke wheels
2x airboxes etc etc

What part of Wales mike,anywhere near Swansea,you could have called in for a coffee.

mikeyboy · Jan 30, 2018

lewisjohn said:
What part of Wales mike,anywhere near Swansea,you could have called in for a coffee.

Proper back of beyond in the middle bit. :confused:

West of Newtown.
Incidentally there is a pair of kiehin stainless silencers which would fit that /6 :augie

peepingtom · Jan 30, 2018

mikeyboy said:
Not after any dispensations
But I have to buy job lots of stuff to get the few bits I want or need.
I realise some of it may well end up in the bin but let’s say someone wants a fork slider because of a damaged thread,I’d rather take a cheeky offer for the front end than be lumbered with 1/2 a set of forks
Today’s trip to wales
R100rs motor,
2 gearboxes
2sets 40 mm bings
Spoke wheels
2x airboxes etc etc

Looks like a sheep must have run out in front of you or is that lot In organized piles

twizzle · Jan 30, 2018

Interesting way to load your van.........

mikeyboy · Jan 30, 2018

twizzle said:
Interesting way to load your van.........

How would you have me load it.?
Strangely enough nothing moved :clap

Cos I don’t drive like a twat

twizzle · Jan 30, 2018

mikeyboy said:
How would have me load it.?
Strangely enough nothing moved
Cos I don’t drive like a twat

Neatly?

mikeyboy · Jan 30, 2018

Ahhh,
I was assisted by a retired gentleman,who had owned the bike from nearly new.
But let’s face it,nothing can fall over if it’s already “over”
Can it :nenau

mikeyboy · Jan 30, 2018

peepingtom said:
Looks like a sheep must have run out in front of you or is that lot In organized piles

It’s as it came out of his shed,
It took less time to drive home than the stories about his ownership of the bike :clap

mikeyboy · Jan 30, 2018

Took it apart in the 90,s after his 1st wife crashed the sidecar outfit into a wall,
Bet the current wife#2 was glad to see the back of it

Took 3weeks of negotiations to see it bought.
He was thinking he would put it back together after it sitting in boxes for 20 years.
Motor turns over nicely though,,,,,I have a use for that :green gri

DrFarkoff · Jan 30, 2018

mikeyboy said:
Aww come on price this lot

mikeyboy said:
Ht leads £20
Headlamp glass £20
Rt front end £100
Rt wheels£125 pair
Spoke front wheels £125 each
Discs £50 pair
R65front end £50
R65snowflake wheel with discs £50
78 65 ate calipers £40 pair
Earlier type ate calipers £50 pair
Happy to service calipers prior to sale poa
Or for that matter anything for sale,including aquablasting and rebuilding spoke wheels etc etc

mikeyboy said:
R60 mainstand£10
Koni shocks £30&£50 pair respectively
Need to take a better look at the rest of the bits,
Happy to post photos as required

Fair Play to Ya Mikey :rob

Do both sets of the sets of Konis need rebuilt ?

mikeyboy · Jan 31, 2018

DrFarkoff said:
Fair Play to Ya Mikey

Do both sets of the sets of Konis need rebuilt ?

One set is better than the other,hardly used really ,I’ll see what they clean up like.
From what I gather there is a bloke fairly local to me that specialises in rebuilding the konis

stuart jenkins · Jan 31, 2018

Hi there,
What would you want for the mono swing arm?
Cheers
Stuart

mikeyboy · Jan 31, 2018

stuart jenkins said:
Hi there,
What would you want for the mono swing arm?
Cheers
Stuart

Just the arm or with shaft and bevel
I have more than one swing arm
One has been bead blasted the other is still painted

Having a clearout of airhead parts

Well-known member

Grumpy Ole Git!!!

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Devil may care...

Well-known member

Devil may care...

Well-known member

Well-known member

Well-known member

Grumpy Ole Git!!!

Well-known member

Member

Well-known member

Similar threads