Over the past two years I have laid down the RT twice in difficult situations. Once after exiting the Santander ferry in the docks , and secondly last year on a farm track near Vila Real . The scratching wasn’t that bad to the right hand pannier but I would like to have replaced it with a new BMW part. Unfortunately it was roundabout £240 for the black bit of the door. I then spotted a video on YouTube of spray shop in the north using plastic paints to refinish black textured car parts, one thing led to another and I found this aerosol on eBay. The photographs show the pannier lid separated from the main box, sanded with 300 grade and dry and then filled with an epoxy resin. I did this a couple of times and finished with an 800 great The photographs show the pannier lid separated from the main box, sanded with 300 grade wet and dry and then filled with a little more epoxy resin. I did this a couple of times and finished with an 800 grade. Prior to spraying it looked poor , however two coats of the textured plastic spray gave an amazing finish which is been very robust and early trials And all for about £20
I recognise that my panniers were not badly damaged due to the fact it was just to tipped over and I have got crash bars on the front of the bike . However I am really pleased with this amazing product. The texture is almost indistinguishable. For a total of £20 I am so pleased. Give it a try Guys!!
I recognise that my panniers were not badly damaged due to the fact it was just to tipped over and I have got crash bars on the front of the bike . However I am really pleased with this amazing product. The texture is almost indistinguishable. For a total of £20 I am so pleased. Give it a try Guys!!