BMW System 6 Comms into New System 7 Helmet?

PembsGSA

Active member
UKGSer Subscriber
Joined
Jun 17, 2009
Messages
249
Reaction score
13
Location
Desert
Currently have two BMW System 6 helmets with the corresponding BMW communications. Helmets are a bit old and tired, so its time for two new helmets. I would like to utilize the existing BMW communications on the new helmets - Thinking about a BMW System 7 but not sure of the compatibility of re-fitting this old comms unit to a new helmet. System 7 appears to be different in design.
Ideally, I would purchase two new BMW System 6 helmets, but they seem to be discontinued and pretty much unavailable.

Has anyone succeeded in removing the BMW system 6 communications from their old helmet and utilizing on a new helmet i.e BMW System 7 or Arai, LS2, Schubert etc.
 
There is a video on YouTube shows how to remove the system. It’s a bit convoluted and involves removing the two cheek pieces of protection foam to slip out the battery pack and control board that seat between the rear section of foam and the shell. I will post the video later if you can’t find it.
I don’t know if the system 7 has the same storage slots in the foam though.
 


Back
Top Bottom