I have my Nav V from my GS LC. What do I need to fit it to my Urban and how should it be connected.
Sat nav on Urban GS
- Thread starter x5ram
- Start date
I used a ram ball mount on one of the handlebar clamps - the BMW connection block is to the left of the headstock, blanked off and cable tied to the front frame tube...
You will need a cradle, ram mount, ram bolt and BMW whiteblock/yellow cable connector.
Look at this on eBay
Genuine RAM-B-367U 1" BALL MOTORCYCLE BASE WITH HOLE AND M8 SCREW - BEWARE FAKES
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/132852651612
https://www.nippynormans.com/gps-ac...any-garmin-or-tomtom-gps-into-the-bmw-harness
You will need a cradle, ram mount, ram bolt and BMW whiteblock/yellow cable connector.
Look at this on eBay
Genuine RAM-B-367U 1" BALL MOTORCYCLE BASE WITH HOLE AND M8 SCREW - BEWARE FAKES
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/132852651612
https://www.nippynormans.com/gps-ac...any-garmin-or-tomtom-gps-into-the-bmw-harness
Bmw 4 button cradle and bike specific mounting kit.
One of these
And one of these
Cradle will plug in to existing spare accessory socket somewhere around the front/under the tank of the bike.
Both can be had for allot less (dealer loyalty discount) through your BMW dealer or get in touch with Sadjim via PM on this forum. He’s done me a good deal not long ago.
Best regards
EV
Sent from my iPhone using Tapatalk
One of these
And one of these
Cradle will plug in to existing spare accessory socket somewhere around the front/under the tank of the bike.
Both can be had for allot less (dealer loyalty discount) through your BMW dealer or get in touch with Sadjim via PM on this forum. He’s done me a good deal not long ago.
Best regards
EV
Sent from my iPhone using Tapatalk
roamer
Registered user
I went for the bmw bracket, allready had the 4 button cradle, EV mentioned,
It fits directly over the handlebar mounts,
The acessory feed plug is on the left side frame rail under the tank,
It wont work with bar backs and the bmw tank bag, there isnt enough clearance, risers are ok,
It fits directly over the handlebar mounts,
The acessory feed plug is on the left side frame rail under the tank,
It wont work with bar backs and the bmw tank bag, there isnt enough clearance, risers are ok,
That's great, thanks for the advice.
Similar threads
