gothbiker
Registered user
I've just fitted it, it misses the panniers and I have a piece of pipe to deflect it just incase
From a fuckin iphone....
From a fuckin iphone....
Stubby exhaust 1150GS - apologies in advance...
- Thread starter Chap in Cheshire
- Start date
My left pannier has some heat reflective padding on the underside but I've not noticed any excess heat from the exhaust. Seems to work fine.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Tallmarkb59
Registered user
Stubby exhaust and custom rear end
Thanks for posting about the stubby can. Just ordered one for my 1150 GS using the e bay link £8.99.
Has anyone removed the tool box / rack combo and replaced with an after market endure style plastic mud guard ?
Thanks for posting about the stubby can. Just ordered one for my 1150 GS using the e bay link £8.99.
Has anyone removed the tool box / rack combo and replaced with an after market endure style plastic mud guard ?
GS Addict
Registered user
Got an old cat? Cut off the stubs, polish, and sell one to a friend
Got an old cat? Cut off the stubs, polish, and sell one to a friend
Will the RSPCA let you do that?
Got a local Bengal that would look nice
Adrian
You can get a 48mm OD 1.5mm wall thickness stainless u-bend on eBay very cheaply, and cut it to any shape you like. Gives a perfect 45mm ID 
Got an old cat? Cut off the stubs, polish, and sell one to a friend
I did the same with a Remus Titanium Y-piece!
Made for lovely exhaust tips.
Unfortunately I've lost both of the bloody things!
Got an old cat? Cut off the stubs, polish, and sell one to a friend
I did the same with a Remus Titanium Y-piece!
Made for lovely exhaust tips.
Unfortunately I've lost both of the bloody things!
More recently - I found a 2nd hand catalyser on ebay for about £20 (I got lucky) and did it again.
The diameter of the 'inlet' pipes are an exact match for the 'outlet' of the catalyser box.
If you fit the larger pannier, don't forget to fit 'blocks' on the pannier because the lower mount is in a different position on the full-size pannier.
(no photos, but will to get one next time I have the opportunity)
I made up a kit for when I fit a full size l/h pannier, that drops the Remus down below it. Link pipe and sliding bracket were both cheap as chips from eBay.
More recently - I found a 2nd hand catalyser on ebay for about £20 (I got lucky) and did it again.
The diameter of the 'inlet' pipes are an exact match for the 'outlet' of the catalyser box.
If you fit the larger pannier, don't forget to fit 'blocks' on the pannier because the lower mount is in a different position on the full-size pannier.
(no photos, but will to get one next time I have the opportunity)
Attachments
This is what I've fitted
Sent from my iPad using Tapatalk
Where would I find one of these? What name would I look under.?
Looks like an eBay special to me… 
Moto GP can
Thank you
I’ve had similar, but they’re not very nice.
I tried one when I went to the IOM and set off 3 car alarms as I rode past at 5am. The rest of the hotel passed comment when I got back for breakfast and I swapped back before I went out again… It’s buried in the garage somewhere, not seen for around 4-5yrs. For what they cost, it’s got to be good for a laugh though
https://www.ebay.co.uk/itm/184549191633?hash=item2af7fd2fd1:g:XLgAAOSwiItfu51R
I tried one when I went to the IOM and set off 3 car alarms as I rode past at 5am. The rest of the hotel passed comment when I got back for breakfast and I swapped back before I went out again… It’s buried in the garage somewhere, not seen for around 4-5yrs. For what they cost, it’s got to be good for a laugh though
https://www.ebay.co.uk/itm/184549191633?hash=item2af7fd2fd1:g:XLgAAOSwiItfu51R
Similar threads
