R9T Scrambler - Warning Lights After fitting.....

Crocadaryl

Registered user
Joined
Dec 6, 2019
Messages
1
Reaction score
0
Location
Hayling Island
Bike: 2017 R9T Scrambler

Problem: The Bike warning Light says “Broken Light” and “Triangle Warning Lamp” are lit. The indicators are flashing too rapidly I think

Note: I fitted some LED indicators and Button Tail Light from BAAK https://www.baakmotocyclettes.com/en/motorcycles/2511-mini-10w-led-turn-indicators 9Moto Gatget M.Blaze Pin Turn Signal
Note: I fitted a Tail light https://www.baakmotocyclettes.com/en/bmw-r-ninet/2422-classic-rear-mudguard-bmw-ninet
Note: All the lights are working! Although

Could this need some resistors or other modification? It could it simply be a reset of the warning lamps? Has he come across this before?

and suggestions to fix? and reset?
 
Its likely to be the resistance,
Did your bike have the led option,
there may be a setting to switch to led either by dealer or gs 911,
did you fit them in stages or all at once, to check for errors,
 


Back
Top Bottom