- Joined
- Jul 14, 2010
- Messages
- 8,670
- Reaction score
- 457
Hi chaps,
I’m sure this has been done to death but any good links would be good reading.
New to me 2009 bike registered 02 2010.
On map 2setting on the rotary dial thing.
Low revs and cruise throttle,it surges and is generally not nice,
The bikes only done 3600 mile from new,so I’m going to run some fuel though it prior to serious investigation.,
I’ll piss about with the rotary map thing but any tips and pointers would be good.
I’ve took the slack out of the cables but the throttle tube seems to have a lot of float on the bars/cable mech.(are they that sensitive)
If poss I’d like to keep the full power map but gain nice rideable response from idle?
Thanks in advance,
I know some of you chaps have had these for a few years.
( don’t make me go to adv rider,pleeeease)
Mike
I’m sure this has been done to death but any good links would be good reading.
New to me 2009 bike registered 02 2010.
On map 2setting on the rotary dial thing.
Low revs and cruise throttle,it surges and is generally not nice,
The bikes only done 3600 mile from new,so I’m going to run some fuel though it prior to serious investigation.,
I’ll piss about with the rotary map thing but any tips and pointers would be good.
I’ve took the slack out of the cables but the throttle tube seems to have a lot of float on the bars/cable mech.(are they that sensitive)
If poss I’d like to keep the full power map but gain nice rideable response from idle?
Thanks in advance,
I know some of you chaps have had these for a few years.
( don’t make me go to adv rider,pleeeease)
Mike