Here we go again
There is no low chassis, or low frame. anyone who tells you there is is a liar
Its a factory low option. Option code - X499A
Lowering is done via
30mm lowered front shock
30mm lowered rear shock
30mm lowered centre stand
30mm lowered side stand
And you have to have the active suspension, ( as thats how they give you the 30mm)
And a low seat (either std or comfort)
Things to note
Despite lowering the bike 30mm, they made it 60mm wider,
so the gains made lowering the bike are effectively lost as the arch required to get you feet down increased by 60mm so no real gain
You can buy an ultralow seat witch gives the 30mm back, but it's a firm to hard foam
If someone can figure a way to scallop the seats you may gain the lost 30mm back
On the hexhead non esa, you could lower the bike 20mm with a low seat after that you needed to change shocks side & centre stand
If you have an inside leg of 28"-29" you wont flat foot it, one foot flat side with a slight lean or tiptoes to balls both sides
on a lowered hexhead (30mm WIlburs) i could comfortably get the balls to almost flat on both sides