Edmund Kean
Registered user
Does your cruise control do this…
Bike: R1250GSA (2021)
Move off/on switch to ON
Set speed using the toggle switch… green symbol appears displaying the set speed in mph
If I decide to increase speed using toggle switch (for instance by 1 mph) – one push doesn’t always register on the TFT but definitely increases speed very marginally by means of audible change to engine tone. A second push will register a 1 mph increase on the TFT display.
It occurred to me yesterday when riding that, could it be possible the input from one push doesn’t raise the demanded speed by 1 mph? And that strangely it was some fraction of 1 mph.
Upon referring to the manual it states one push = 1kph.
Thought I had an intermittently functioning switch but it seems not.
Bike: R1250GSA (2021)
Move off/on switch to ON
Set speed using the toggle switch… green symbol appears displaying the set speed in mph
If I decide to increase speed using toggle switch (for instance by 1 mph) – one push doesn’t always register on the TFT but definitely increases speed very marginally by means of audible change to engine tone. A second push will register a 1 mph increase on the TFT display.
It occurred to me yesterday when riding that, could it be possible the input from one push doesn’t raise the demanded speed by 1 mph? And that strangely it was some fraction of 1 mph.
Upon referring to the manual it states one push = 1kph.
Thought I had an intermittently functioning switch but it seems not.