Street fighter nav?

Possibly. I found these
On the ram
Mount website. Do you think they will fit between the handlebar clamp?
Am not sure of the diameter of the bars and there are three sizes.

https://www.ram-mount.co.uk/index.php?route=product/search&search=Torque

I dont think so TBH but without it in my hand its hard to tell but the steering damper is sort of in the way of mounting much in the centre and the clamps are offset but possible I suppose maybe just a simple Ram mount clamped on the bars to the left with cables tie wrapped neatly might be your best option although not ideal

I doubt the Ducati Forum will be much help (they rarely are)but it could be worth asking

I used out early that Sat Nav would be trick so binned the Garmin and went Beeline which fits on the steering damper a treat
 
I have just been and checked and there is little possibility of clamping anything in the centre of the clamps as there is no where near enough clearance

You could swap out one of the clap bolts but .....

Any way the phon pics should show you a little better
 

Attachments

  • IMG_1630.jpg
    IMG_1630.jpg
    243.9 KB · Views: 38
  • IMG_1631.jpg
    IMG_1631.jpg
    244.3 KB · Views: 38
Same as mine down to the yellow paint on the bolts !!
I’ve used one of the bolts on the handle bar
Clamp on an s1000r and it worked perfectly. So may try that.
Or use the damper screw,once
I’ve tried I’ll report back .
 
Same as mine down to the yellow paint on the bolts !!
I’ve used one of the bolts on the handle bar
Clamp on an s1000r and it worked perfectly. So may try that.
Or use the damper screw,once
I’ve tried I’ll report back .

And as you can see my Torque wrench is not calibrated to the Factory one
 


Back
Top Bottom