Looking for an R80/100 Mono Front disc

VAL. H.

Thrower of cats at pigeons
UKGSer Subscriber
Joined
Jan 24, 2005
Messages
2,485
Reaction score
1
Location
West Wales'ish
I'm looking for an R80 Mono (1989) front disc. Want to upgraded to twin discs.

Does anyone have one they want to part with.



Val.
 
If you don't get sorted with SteveHop.

I also have one I bought with a wheel and forks from an early bumble bee.

4 bolt disc (G/S is 5 bolt).

Discs were not a drilled 88-90

I will check the thickness tomorrow.

Gerry
 

Attachments

  • Screenshot 2021-11-10 at 22.07.47.jpg
    Screenshot 2021-11-10 at 22.07.47.jpg
    41 KB · Views: 142
I have a g/s disc if that's any good.

Thank you, But as the otheres have said, the g/s has five holes.


I have one off a R100GS its the standard diameter

G/S and GS are different depths

Cheers Steve. I'll have a look today to see if it's the right one, it's under wrapps in the back shed at the mo. My outfit is based on an RT and I think the discs are a bit different. I'll compare it to Jills 100gs para.



If you don't get sorted with SteveHop.

I also have one I bought with a wheel and forks from an early bumble bee.

4 bolt disc (G/S is 5 bolt).

Discs were not a drilled 88-90

I will check the thickness tomorrow.

Gerry

Thanks Gerry, might be in touch.
 
Hi, I misread your request.

As mine is a GS disc I doubt the it will fit.

According to Motorworks you need this disc for 06/1988 to 08/1990 R80RT mono single disc bikes to match up: https://www.motorworks.co.uk/vlive/Shop/Parts.php?T=6&Q=+34111458110&search=SEARCH

Gerry

Thanks. Been and had a look to compare the two. Seems the GS disc has a deeper dish. However the disc is floating and it fits on the outer edge of the dish. Whereas the RT dish is shallower and the disc fits on the outside of the dish. So might fit all the same. I'll have to get out there and pull the front wheels of the two bikes to get a better look.

Is your disc already off the wheel? Maybe you'd be able to give me some measurements of the depth of the dishing? The measurement I need is the total depth of the disc and its dished carrier.

By just offering up a tape measure to the fitted wheel it seems, both discs look like they are the same diameter and thickness 280mm x 5mm.


The 1st pic is the RT Mono, the 2nd GS,para. Looking to the far right of pic 1 you can see the RTs disc is mounted on the outside of the dish/carrier.


Val.
 

Attachments

  • RT Front Disc2.jpg
    RT Front Disc2.jpg
    81.5 KB · Views: 112
  • GS Front Disc.jpg
    GS Front Disc.jpg
    87 KB · Views: 108
Disc

Here is the one im selling
If you have a look on the Siebenrock website they list different discs models .
I have just held a tape measure up but to give the exact size i will need to take it off
 

Attachments

  • PD front brake upgrade.jpg
    PD front brake upgrade.jpg
    86.4 KB · Views: 101
  • Disc.jpg
    Disc.jpg
    45.4 KB · Views: 99


Back
Top Bottom