Roadlok

davidfbmw

Active member
UKGSer Subscriber
Joined
Aug 10, 2014
Messages
167
Reaction score
5
Location
sheffield
Just took the roadlok off my 1250 with Hayes brakes and the new one has Brembo brakes fitted, I’m presuming the spacer and bolts will be same for the 1200’s that had Brembo fitted
Anyone know the setup please, to save me some time
 
Good point, I’m switching from a 1200 (Brembo) to 1250 (Hayes) so relevant for me too
 
Good point, I’m switching from a 1200 (Brembo) to 1250 (Hayes) so relevant for me too
I know they are different, mine was on a 1200 before but can’t remember the sizes
Can measure mine tomorrow for u if u wish
I’m sure I used the 90mm bolts tho
 
I took mine off my old 1200gs and put it on my 1250gs using same bolts and spacers.
The bolts are 90mm & spacer E 17mm long.
 
Good point, I’m switching from a 1200 (Brembo) to 1250 (Hayes) so relevant for me too

As I recall, I used the same bolts and spacer from 1200 brembo for the Hayes 1250.
 
That’s strange, bought mine used and was used on a 1200 with Brembo’s and had to buy a spacer kit to use with the Hayes callipers as the roadlok was catching the caliper
Will try it later
Thanks guys
 
Used same bolts and spacer which works ok for now but is a big gap between roadlok and caliper
 


Back
Top Bottom