I'm doing a EU tour this year and wondered if it was possible to change the digital display on a 2014 R1200GS from MPH to KMPH using the MotorScan software?
Is it possible
Is it possible
Just multiply mph by 1.6 and you have kph.
e.g. 50mph = 80kph.
I'm doing a EU tour this year and wondered if it was possible to change the digital display on a 2014 R1200GS from MPH to KMPH using the MotorScan software?
Is it possible
What's the dashboard like? All digital?
I can change the (fully digital) dash of my HP2S from miles to km with Motoscan. Did it a few times already.
Yes it is. I have chnged all my digital readouts from Km to miles - ie the MPG, Miles left to empty etc. This was on a F650 but MotorScan works with the 1200s as well.
It is very easy:
30 kph = 20 mph (near enough)
50 kph = 30 mph
80 kph = 50 mph
100 kph = 60 mph
120 kph = 70 mph
It is not difficult to remember. People did it for years without a calculator or magic speed displays. If you are really stuck, halve the kph limit displayed on the roadside sign. You’ll be under the speed limit, as the basic table above shows.
PS Modern Garmin GPS devices have the bike’s current speed displayed by default. The display changes red, when the known speed limit is exceeded. It works just the same abroad, without you doing anything.
Can your sat nav not be changed to KPH?
use the speedo on that... more accurate tbh
its usually just a quick menu option
From the internet my dash is similar to:
Since I understand OP allready has nailed the math, the short question is : No.
The instrument cluster shows the value with a pointer that points to a scale on the background. (Os OP knows ). Later models got a combined scale that shows both km/h and mph.
BMW would never allow for the needle to show km/h if the scale background displayes mph, even if it in theory it would be possible to change the software and allow the needle to show the correct number.
Besides, I'm sure that in some countries this option would be illegal....
Tell 'em son
The OP has asked the question about the digital speed display, which is part of the functions of the earlier dash layouts, and works alongside the needle analogue display.
Yes it is possible to change from MPH to KPH. I had mine done for free by a dealer during a service. I think it can also be carried out with GS911 and possibly Motoscan.
Most people in Ireland have been doing it for years. We changed from mph about 20 years or so ago. It’s a simple thing to do in your head as you drive/ride along. JJH